Comments on: BLUE PRINTING MIKUNI 28MM RACE CARB

By: 2F4R

2F4R — Thu, 12 Nov 2009 13:23:31 +0000

it’s a mikuni flat …
it’s a mikuni flat slide carb, TM series, the round slide is called the VM series.

By: ils360

ils360 — Thu, 12 Nov 2009 13:23:30 +0000

nice video 5***** …
nice video 5***** why are peple so afraid to touch a carb???

By: warezvz

warezvz — Thu, 12 Nov 2009 13:23:29 +0000

hm… dont want to …
hm… dont want to insult you but i have a lot experiance with scoots, but the polishing of a carb is not use to anything else then wearing down the metal and scratching it and this leads to removing the optimal mixture of 14.7:1 to 15 or more. So its no use. Also polishing it wont do any good on puting the friction down because this metal has fine pores that dont alove the fluid and air to do friction on it and if polishing them you are adding friction to it.

By: warezvz

warezvz — Thu, 12 Nov 2009 13:23:29 +0000

il do a carb vid of …
il do a carb vid of my TK (TeiKei) and my mikuni when i disasamble them again (in the spring)

By: DIOSpeedDemon

DIOSpeedDemon — Thu, 12 Nov 2009 13:23:28 +0000

@warezvz It could …
@warezvz It could not hurt either and I have always wanted to give it a try, so it is winter and I am going to play with it. Good advice as usual. DSD

By: xstr33tr4cerx

xstr33tr4cerx — Thu, 12 Nov 2009 13:23:27 +0000

well they are kind …
well they are kind of complicated looking when its on the engine

By: ils360

ils360 — Thu, 12 Nov 2009 13:23:26 +0000

i gess so
i gess so

By: DIOSpeedDemon

DIOSpeedDemon — Thu, 12 Nov 2009 13:23:26 +0000

@2F4R You are …
@2F4R You are right as always. Good to have a friend with so much knowledge. REspect= RH DSD

By: KuceenC

KuceenC — Thu, 12 Nov 2009 13:23:25 +0000

as much as I know …
as much as I know polishing intake parts is not a good idea. As the pores it he metal create little vortexes and helps fuel mixing with air and prevents big vortexes at places where the channels bend… You can smoothen the edges and align all channels better, but don’t polish it to a mirror shine.

By: KuceenC

KuceenC — Thu, 12 Nov 2009 13:23:24 +0000

English isn’t my …
English isn’t my first language, so if you didn’t understand, let me know and I could try to do it better.